| |
|
BALLOMAX API-6D Q1 ball valves
Material Specifications
Fully Welded Ball Valves (Weld End)
| BODY: |
C/S - ASTM A216 Gr. WCB, A106 Gr. B, A105
A352 Gr. LCB
S/S - ASTM A351 Gr. CF8 CF8M, A182 F304 F316 |
| BALL: |
C/S - A105, A216 WCB, A352 LCB+ENP
S/S - ASTM A351 CF8 CF8M, ANSI 304 316,
A217 CA15 |
| STEM: |
C/S - A105 AISI 1020 +ENP
AISI 4140 +ENP
S/S - ASTM A182 F304 F316, AISI 304 316 |
| SEAT: |
METAL SEAT WITH INSERT RING
C/S - A36/A216 + NICKEL COATING
S/S - ASTM A351 CF8, CF8M / AISI 304,316
A743 CF8, CF8M / AISI 304,316 |
| SEALS: |
GRAPHITE, PTFE, FPM etc. |
| SPRING: |
ASTM B637 Gr. 688, INCONEL X-750
AISI 304 316 |
| TRUNNION: |
AISI 304 316 or Equivalent |
| STUDS/NUTS: |
A193 B7 A194 2H, A320 L7M A194 7M
A193 B7M A194 2HM |
| PRESSURE RATUNG: |
ANSI CLASS 150, 300, 600, 900
1500,2500 |
NOTE: The above is a typical listing of materials for BROEN standard applications
All the materials may be substituted at user's request.
| 1. BODY |
17. GRAPHITE PACKING |
| 2. BALL |
18. WASHER |
| 3. OUTER SEAT RING |
19. GLAND BUSHING |
| 4.SEAT O RING |
20. STEM O RING |
| 5. INNER SEAT RING |
21. STEM NECK |
| 6. SEAT KEY |
22. GREASE FITTING
(SEALANT INJECTOR) |
| 7. U CUP RING |
| 8. O RING-STEN |
23. NECK O RING |
| 9. SEAT COIL SPRING |
24. STEM KEY |
| 10. END PIECE |
25. STEM |
| 11. BODY O RING |
26. TRUNNION |
| 12. DRAIN PLUG |
27. TRUNNION O RING |
| 13. GREASE FITTING W-CHECK VALVE |
28. DOWEL PIN |
| 14. RELIEF VALVE |
29. DRY BEARING |
| 15. WRENCH BOLT |
30. THRUST WASHER |
| 16. NECK FLANGE |
31. BEARING RETAINER |
|
 |
